63T transfer type molding machine

Transfer Type Molding Machine

The transfer type molding machine for rubber(semiautomatic rubber injection molding machine) is an advanced rubber pressure molding equipment,it is suitable for producing rubber model products with metallic insert, complex shape, big cross-section and thick-wall., these products¡¯ process is complex and more difficult to form. Among them ¡°the multi-purpose rubber transfer type molding machine (semiautomatic rubber injection molding machine) based on the frequency conversion technology¡± was established as National Science and Technology Ministry innovation fund project of technology type medium and small enterprises.

Summary:

   XZB series transfer type molding machine for rubber(semiautomatic rubber injection molding machine) is our companys original R&D results and has a number of national patents (Patent No.ZL 03230397.3 ZL200420110566.1 and ZL200620105181.5). It is an advanced rubber pressure molding equipment with compact structure, wide applicability and high degree of automation, especially, it is suitable for producing rubber model products with metallic insert, complex shape, big cross-section and thick-wall., these products process is complex and more difficult to form. Among them the multi-purpose rubber transfer type molding machine (semiautomatic rubber injection molding machine) based on the frequency conversion technology was established as National Science and Technology Ministry innovation fund project of technology type medium and small enterprises.

63T transfer type molding machine group for rubber

Technical Parameter Table

Items	Unit	Spec.
Clamping force	Kn	630
System pressure	Mpa	21
Clamping stroke	Mm	250
Fast clamping speed	Mm/s	≥60
Transfer pressure	Mpa	110
Transfer stroke	Mm	305
Injection weight	Cc	808
Hopper specification	Mm	Φ70x215
Ejector stroke	Mm	250
Ejector tonnage	Kn	60
Heater platen distance	Mm	120~350
Heater platen	Mm	400x450
Max. temp.		250
Motor power	Kw	7.5
Heater power	Kw	(3.6 3.9)x2
Oil tank capacity	L	400
External dimension	Mm	2900x1700x(2350~2580)
Weight	T	5.5

 

1). 2RT, 3RT available.

2). The clamping cylinder clamps the form before the injection cylinder evenly injects the gum into the cavity. Therefore, the products have very little brim escapes and accurate geometrical dimensions with even and stale physical and mechanical properties.

3). The combination of a low-noise internal engaging gear pump and a HP piston pump is controlled by dual-purpose proportional pressure & flow valves. Energy efficiency is achieved with this advanced, rational and reliable oil loop configuration.

4). The moving platen travels up quickly, clamps slowly and travels down quickly to protect the mold and increase production efficiency.

5). Adopts automatic insertion/withdrawal device and ejection device to reduce labor intensity and prevent mold damage by human factors.

6). Equipped with PLC, electrical system is easy to operate.

7). With two modes, namely Bump and Semi-Auto, it is simple and fast to prepare the roughcast and the production is very efficient.

8). User can choose Siemens or Mitsubishi PLC controller, 5.7 inch touch-screen.

other products:

• Transfer Type Molding Machine
• Plate Vulcanizing Press
• Vacuum Vulcanizing Press
• Rubber Injection Molding Machine
• Transfer Type Molding Machine For Thermoset Plastic
• Rubber Mould
• Rubber Products